Skip to main content
All CollectionsProduct SupportPower Supplies
PSB-1 Power Supply (PS112, AQ-PSB-1)
PSB-1 Power Supply (PS112, AQ-PSB-1)

Support Resources for PSB-1

A
Written by Aquatic AV
Updated over 3 years ago

What Are You Looking For?


Overview


Do you need a new dual input power supply? The PSB-1 110/240V 4-pin Amp/Molex connector is an excellent choice. With a power factor of 0.9 or greater and a power efficiency of at least 87%, this power supply is ready to make sure your tunes never have to stop. Designed to withstand common hazards ranging from water to over voltages and over temperatures, the PSB-1 is a truly durable and reliable piece of equipment.

Features


  • 110/240V AC Input Voltage with a power factor of 0.9 or greater

  • Has a power efficiency of 87% or greater

  • Durable against water, over voltages, over currents, and over temperatures.

  • Compatible Output Connector: 12 V DC Female Spade Connectors

  • UL, CB, and CE certified

What's in the Box?


  • 1 power supply unit

Environment Install Instructions


The red wire is the (+) and the black one is the (-) for the output.

Frequently Asked Questions


Q1. Will this replace my old Aquatic AV power supply?

A1. Yes, it will. Look at the picture of this power supply and verify that your current one has the same connectors. The only difference is that the new power supply will be smaller in size.

Q2. What are the dimensions of the new power supply?

A2. The dimensions of this power supply can be found below:

Specifications


Type:

Regulated switching mode power supply (≤10A, 13V DC)

Waterproof:

Yes – IPx5

Input Voltage:

100-240V AC (power input auto sensing/switching)

Input Frequency:

50/60 Hz

Efficiency:

≥87%

Power Consumption:

≤0.5W (at 240V AC)

Power Factor:

≥0.9 (at full load)

Short Circuit Protection:

Continuous

Output Plug:

2x female spade connectors (+13V DC (red), Neg (black))

Output Voltage:

13V DC regulated

Output Current:

5A

Ripple & Noise:

260mV (max)

Voltage Accuracy:

±5%

Line Regulation:

±5%

Load Regulation

±5%

Operating Temperature:

-20°C – 70°C

Storage Temperature:

-20°C – 85°C

Dimensions:

49 x 234 x 110 mm

Certifications:

UL1563 class2, UL1310, CSA, CE

Additional Features:

Over Voltage Protection, Over Current Protection

Over Temperature Protection

Dimensions


Owner's Manual


Did this answer your question?